Model Name P7-C1 Pro Case Type Mid Tower Steel Thickness 0.6mm Motherboards ATX / micro ATX / mini-ITX Case Dimensions (Internal) 208mm x 475mm x 406.6mm (W x H x D) Case Dimensions (Overall) 244.6mm x 550mm x 446.4mm (W x H x D) Side Panel Tempered Glass 3.5 Drive Bay 2 (Internal) 2.5 Drive Bay 4 (Internal) Expansion Slot 7 GPU Clearance Supports GPU up to 375mm/400mm (without front fan) CPU Clearance Supports CPU up to 165mm I/O Ports USB3.0 x 2 | USB2.0 x 2 | HD Audio & Mic. | SD Card Reader Air Cooling System Front: 120mm Fan x 3 or 140mm Fan x 2 (Includes 120mm x 3 RGB Fans) Top: 120mm Fan x 2 (Optional) Rear: 120mm Fan x 1 (120mm Black Fan Included) Radiator Support Front: 240mm Radiator or 280mm Radiator or 360mm Radiator x 1 (Optional) Top: 240mm Radiator x 1 (Optional) Rear: 120mm Radiator x 1 (Optional) Net Weight/Gross Weight 8.8Kg (19.4 Ibs)/10.4Kg (22.9 Ibs) Power Supply ATX PSU (Optional) EAN Code P7-C1 Pro Black 4713105958492 P7-C1 Pro White 4713105958508 Model Name P7-H1 (Project 7-Hub1) System Compatibility Windows 7 and later Connector 9-Pin USB2.0 LED Output Count 2 Connectors (Expandable) LED Output (Watt) Up to 24 Watts Fan Output 5 Connectors Fan Output (Watt) Up to 18 Watts Main Function Sets RGB colors, LED modes and monitors fan speeds COOLING SYSTEM P7-C1 Pro [ Rear ] [ Front ] Black Edition AeroCool Project 7 P7-C1 Pro Mid Tower RGB Case (Black) with Project7-Hub1 RGB Controller 24 AeroCool Project 7 P7-C1 Pro Mid Tower RGB Case (Black) with Project7-Hub1 RGB Controller 25 White Edition AeroCool Project 7 P7-C1 Pro Mid Tower RGB Case (Black) with Project7-Hub1 RGB Controller 24 AeroCool Project 7 P7-C1 Pro Mid Tower RGB Case (Black) with Project7-Hub1 RGB Controller 25 Fan 120 x 120 x 25mm 120 x 120 x 25mm Rated Voltage 12V 12V Operating Voltage Range 6.0~13.2V 9.0~12.0V Starting Voltage 6V 9V Power Consumption 1.44W 10% Max 1.8W 10% Max Rated Current 0.12A - 10% Max 0.15A 10% Max Speed 1200 - 10% RPM 1200 - 10% RPM Air Flow (CFM) 36.4CFM 45.8CFM Air Pressure 1.32mm-H2O 1.01mm-H2O Noise (dBA) 26.5dBA 14.5dBA MTBF 20000 hours 60,000 hours Browse more PC Cases at EasyPC.

How To Tuck For Drag

Step 1) Preparation: For obvious reasons, do not apply tucking tape over pubic hair! The region should be shaved or waxed, although short stubble is fine too. For best results, the skin must also be clean and dry.

Step 2) Tubular Gauze: Cover the head and shaft of the penis with a piece of tubular gauze. Twist the free end so as to close the tubular gauze at the tip of the penis, then roll the remaining tubular gauze back down over the shaft. Massage the tubular gauze lengthwise for a snugger fit.

Step 3) Start The Tape: Remove the first inch of tape backing paper and apply the tucking tape to the pubic region. Start 1″ to 2″ above the base of your shaft, and press the tape firmly to establish strong adhesion.

Step 4) Time To Tuck! Use your fingertips to guide the testicles upward into the abdominal cavity (explained below). Then pull the shaft and loose skin rearward, toward the buttocks. Reach around from behind, and hold everything in place with one hand.

Step 5) Apply More Tape: Use your free hand to remove a bit more backing paper, and apply more tape. Work from front to rear, keeping the tape taught for a tight tuck.

Step 6) Finish Taping: Pull the tail towards the small of your back.

Tape Removal

For a gentle release, some customers prefer to remove tucking tape in the bath or shower. Others wipe the tape with our Antec NX292 Mid Tower Tempered Glass Side Panel Gaming PC Case Black and give it a minute to soak in.

How Do Drag Queens Tuck?

There are numerous ways to tuck for drag with Tuck Yourself Tucking Kits. Most of them involve pushing the testicles upwards, and into the abdominal cavity. Biological males are born with undescended testicles, and by 9 months old, the testicles descend via the inguinal canal. Even as adults, the testicles can usually be manipulated back into the the abdominal cavity with minimal discomfort. From there, everything else is pulled tightly back, towards the buttocks. Typically, the tuck is secured with tape, or a supportive garment called a Antec VX100M Tempered Glass Side Panel w/ 3 RGB Fans Micro ATX PC Case Black. Tucking tape provides an extremely flat tuck and maximum security. For this reason, tucking tape is very popular among drag performers. It is also a natural choice for swim suits, leggings, tight skirts, and other form-fitting attire. In contrast, many crossdressers prefer the convenience and comfort of a gaff, especially when wearing paired with less revealing outfits.

Watch Diana’s YouTube tutorial for even more drag queen tuck tips.